Why Are Evaporative Air Cooling Units Helpful in Industry?

The evaporation of air is a natural cooling process, much like the wind blowing across hills. Evaporative air coolers provide 100% fresh, filtered cool air for a fraction of the cost of an air conditioner. This makes it cost-effective for cooling large spaces.

Industrial buildings can benefit from evaporative cooling with the right technology.

What exactly is evaporative cooling?

The basic principle behind industrial cooling systems is to establish a natural cooling process. This is accomplished by evaporation, which aids in supplying fresh air flow directly into your facilities. In general, the relevant evaporative coolers will circulate heated air through a water-soaked cooling medium, which cools it down and gives cool, fresh air to the specified location.

Evaporative cooling is one of the most dependable and cost-effective means of maintaining optimal temperature and humidity levels. The "Ventech" Evaporative Air Cooling Unit is what your evaporative cooling system requires to function successfully and affordably.

Why is evaporative cooling used?

Cost-effective: Water evaporation reduces the temperature of a dry bulb. Evaporative cooling is a cost-effective form of cooling.

Low energy consumption: Natural air cooling is used without artificial techniques, reducing energy consumption.

Eco-friendly air conditioning: Evaporative cooling is used to chill the air instead of mechanical cooling.

What are the benefits of an evaporative air cooling unit?

Cool and fresh air

• 100% fresh air for superior indoor air quality.
• Dust-free atmosphere due to clean and changed air movement.
• Aids in the diluting of viral density in the air, lowering the risk of infection from contagious viruses in the air and decreasing health risk.

Economical Price

• Our products contribute to LEED and other energy certifications.
• Outstanding return on investment.
• energy savings of up to 60%.
• Advantages of carbon credits
• Lower operating expenses

Enhances the Working Environment

• Mechanical refrigeration can be replaced in industrial, commercial, institutional, and agricultural applications.
• During peak summer months it reduces the fresh air temperature.
• Lower the temperature while using the least amount of energy.
• It’s simple to set up and maintain.
• Increased output.
• Reduced absenteeism.

The Cool Air-Cooling Method

• Comfortable Working Environment - Beat the Heat Quickly and economically
• Improved indoor air quality and productivity
• Helps in the reduction of greenhouse gas emissions
• There is no sick building syndrome.
• There is no ozone depletion.
• There were no CFCs detected.

The Luxury of Customization

• Our customers can customize and select according to their specific needs.
• We can provide compact and strong air washer units in single and double-skin construction to meet the needs of our clients.
• Our high fabrication quality guarantees low casing leakage, low alter bypass leakage and high mechanical strength.
• We also offer Civil Masonry Type Air Cooling Units with various equipment fitted inside an ergonomically built room for demanding applications.
• Low RPM is intended for lower noise levels and trouble-free operation.
• Top, bottom, and side discharge options are available to accommodate the site layout.

How does it work?

• Evaporative cooling devices use the natural process of evaporation to convert hot air into a cool breeze.
• A fan blows hot, dry air across cooling pads that absorb water from a reservoir.
• When hot air passes over the cooler pads, the water molecules on the surface evaporate, lowering the temperature of the air inside the system.
• This fresh air is circulated throughout a building, forcing hot air outside.

Contact our team of experts to learn more about evaporative air cooling or for assistance in selecting the right system for your needs.

Axial Flow Fans-Ventech Systems Pvt. Ltd

VENTECH SYSTEMS, a pioneer and renowned leader in air handling technology, provides a diverse range of axial flow fans for industrial ventilation, air conditioning, dust extraction, and fume extraction systems. Axial fans come in a variety of blade and hub designs to meet the performance needs of each application. It is our original design that allows us to manufacture a wide range of axial fans tailored to specific needs.

A fan's design is influenced by its installation. Aside from physical qualities like pressure, flow rate, and temperature, the operating system and installation location are significant. The size of a fan is influenced by its motor and accessories.

It provides various varieties of airflow ventilators that are meant to exhaust all industrial pollution from the factory, industrial unit, or other covered spaces, including smoke, gases, moisture, odors, heat, dust, and other pollutants. At the same time, these axial flow fans provide fresh air inside while providing a safe, clean, and comfortable environment.

These ventilators are simple to install in most industries, like warehouses, factories, garages, and restaurants, among others, to control temperature and keep pollutants and heat away.

Axial fans pull air into the fan and expel it in the same direction using a propeller. All Ventech Axial Flow Fans are custom-made to fit all purposes and mounting positions.

The impellers, hubs, and blades are made of aluminum alloy, ensuring high efficiency and low noise. A variety of impellers are available in aluminum, with fixed blades or changeable blades and pitch angles.

Highlights include:

• Minimal Maintainance
• Noiseless
• Low power density
• Large Volumes of Air
• Vibration Free
• Cost-effective
• Optimum Performance

These are some of the most important characteristics and applications of axial fans. In recent years, these fans have gained widespread popularity among many industries due to their efficiency and effectiveness for general-purpose cooling.

We manufacture fans to meet any ventilation requirement. VENTECH offers one of the most complete and diverse axial fan families on the market.

The Significance of Pressurization and Ventilation Systems

Filtered air is supplied to a work area by a forced ventilation system. If the functional area's internal air pressure exceeds the air's density, dust and contamination will not be able to enter. As a result, this system will keep the working environment clean and ventilated. Natural ventilation is rarely satisfactory unless outside circumstances are excellent, which rarely occurs. The natural supply of fresh air is determined by the temperature difference between inside and outside. It is rare for fresh air to flow into an inhabited space unless a breeze is blowing in the right direction.

As a result, natural ventilation is ineffective when the weather is hot and windless. Additionally, dust can't enter the building spaces through faulty air ingress control. So, forced ventilation systems are required in the majority of cases, and three alternative methods can be used in this situation.

1. Extraction/exhaustion of air
2. Access to fresh air
3. Sequential extraction and supply

Industrial facilities need to create a pressurization effect to achieve dust proofing, which can typically be achieved by cleaning incoming air if necessary.

The degree of air cleanliness is dictated by the requirements of the process being carried out in an industry, and it can be achieved by using a suitable filter medium such as HEPA, MICROVEE, HDPE, and other high-efficiency filter media.

Let's explain the difference between ventilation and pressurization systems in detail.

Ventilation System-

Ventilation systems are used to provide enough air circulation in the working area for people's comfort.

There are two types of systems. In a dry ventilation system, outside air is pumped into the area without cooling. In many circumstances, such systems are installed to pressurize the space. Outside air is cooled here before being introduced into the atmosphere. Cooling can be accomplished using an evaporative cooling system, a typical spray-type system, or Celdec-type cooling pads.

Proper exhaust is required in both of the applications.  Natural air might come through doors and windows, or mechanical air can come from ducts and fans. Roof ventilators are sometimes placed to remove the heat from the area.

Pressurization System-

Pressurization systems are installed to keep the enclosed region at a little higher pressure than the adjacent area. This is done to prevent air, smoke, or gases from leaking into the enclosed region from the adjacent area. All doors and windows are kept closed in this type of application. When any door is opened for any reason, the inside air tends to escape and no outside air enters the enclosed region.

Electrical Rooms, Pharmaceutical Blocks, air-conditioned areas, engine assembly areas, lift machine rooms, compressor rooms, and staircases are all places where the system can be used.

Ventech Systems manufactures a variety of ventilation systems for a variety of industries in India. Please do not hesitate to contact us if you have any questions or need any services.

Centrifugal Fans: Essential in All Types of Industries

A centrifugal fan is an air-moving pump or motor. It draws air into the blower before pushing it out at a 90-degree angle. A centrifugal fan consists primarily of an impeller and a motor. Impellers pull or suction air as opposed to propellers, which push.

Centrifugal fans are common in the HVAC industry. They are more likely to be found in building ventilation systems. Industrial processes frequently utilize them to transport gases or chemicals. Centrifugal fans are also used in air pollution control systems. They are effective at dust management.

They are employed in industries where higher volumes of airflow with constant pressure are required. They are quite beneficial in industrial processes such as dust collection, drying and cooling, general ventilation, and air circulation.

The most noticeable distinction between centrifugal blowers is the angle of their blades, which might be backward, forward, or radial (the blades extend out from the impeller).

A Centrifugal Fan's Operation

The revolving fan blade creates a low-pressure zone in the center of the blade and a high-pressure zone at the blade's edges. It also increases the kinetic energy of the air. The low-pressure area in the fan's center creates a vacuum, which draws air into the fan. The air flows from the center of the fan to the fan's outside edges. It flows out of the container around the impeller in the correct direction.

These centrifugal fans have their quality features. The sort of industrial fan you require in your operation to achieve efficiency and dependability is determined by airflow volume, static pressure, and the application of the fan. Once you've identified those criteria, you'll be able to tell Ventech Systems to select the best fan for your application.

Industry Usage

  are suitable for a wide range of applications. Chemical processing, toxic gas management, dust collection, dryers, smoke control, process cooling, and process heating are a few examples.

The following are examples of common centrifugal fan applications:

Clean Air Handling- Air movement is an important aspect of every industrial operation or facility. Industrial air handling activities support processes while also ensuring clean air in the surrounding area.

Material handling- Sand, plastic pellets, sawdust, wood chips, grain paper trim, and other particles can be processed using centrifugal force material handling. They range in size from microscopic particles to heavy, rough compounds.

Processes involving high temperatures- Many processes rely on high-temperature heating systems. Heat is circulated through chambers via a heat convection system, which needs the employment of precisely engineered centrifugal fans.

Dust loading procedure- These fans are also used in industrial processes as part of the dust collection system to maintain air quality. The system's many components can move small particles alongside the dust and can include air filtration.

To know more about centrifugal fans and applications, contact our experts or visit us at: https://www.ventechsystems.com/centrifugal-fan-manufacturers-in-india.php

How to Prevent Pollution From Industries

Pollution prevention refers to any practice that reduces, eradicates, or limits gas emissions before they occur. The prevention of pollution can be applied to any polluter, including those in the energy, agriculture, federal, consumer, and industrial sectors. Air pollution has an enormous impact on health, in part because it causes pollutants to move deep into the lungs. These invisible, harmful particles can affect cardiovascular and respiratory diseases. To control air pollution from industries and protect the environment and people's health, it is important to use Ventech dust extraction and collection systems. 

Dust extraction and collection are critical components of industrial air pollution control. Modern industrial practice necessitates a safe and sanitary environment for all humans.

Engineers and governments must take proper consideration and effective action to protect the environment from industrial pollution. To control air pollution, dust extraction and collection are critical in any industry, whether it is a large steel plant, a coal handling plant, a cement plant, or even a small-scale factory.

A dust extraction system must be customized to the working environment. The operating frequency, material type, load, space, and quantity of air are to be considered. Ventech designs dust collection systems taking into account the specific working environment, ensuring they are reliable and efficient.

A dust collection system is distinguished by:

• high potency
• minimal energy consumption
• explosion-safe design 

A dust collector is a system that collects dust and other impurities from the air and environment to improve the quality of air released from industrial and commercial processes. Ventech Systems offers a diverse range of dust collectors that meet industry standards. The basic principles of a dust collection system are to control, convey, and collect. We also custom design, manufacture, and install dust collectors, as well as hoods, ducts, blowers, chimneys, and other accessories for our customers. All dust collectors are built to the highest standards of quality, efficiency, and safety.